Home > Products > Chandeliers and Pendants > Travertine Fluted Glass Chandelier
Travertine Fluted Glass Chandelier
  • Travertine Fluted Glass ChandelierTravertine Fluted Glass Chandelier
  • Travertine Fluted Glass ChandelierTravertine Fluted Glass Chandelier
  • Travertine Fluted Glass ChandelierTravertine Fluted Glass Chandelier
  • Travertine Fluted Glass ChandelierTravertine Fluted Glass Chandelier

Travertine Fluted Glass Chandelier

    Travertine and fluted glass chandelier in 6, 8 or 10 light, or green marble on matte black. Ø680-1000 mm, 835 mm drop, E14. Made by Strong Lighting.

    Model:16114-8

    Send Inquiry

    Product Description

    A column of yellow travertine. 

    Brass arms that dip below it and lift again. Glass cylinders reeded from base to rim, each seated in its own stone collar. Seen from the dining table, the fixture reads as a wave rather than a wheel — and the stone, not the metal, is what the eye lands on first.

    That is the 16114 series. It comes in three diameters — six, eight and ten lights — and in two stones: yellow travertine on antique brass, or deep Indian green marble on matte black or satin nickel. One page covers all of them, because in practice the decision is never only about size: a buyer is choosing a diameter, a stone and a finish at the same time, and the answer changes with the room.


    This travertine fluted glass chandelier is built for rooms where the light itself is the decoration: dining rooms, open-plan living zones, double-height voids and hotel floors. Everything below — the stone, the glass, the sizing maths, the specification — is the same object looked at from a different angle.

    A Column of Stone Instead of a Brass Hub

    Most multi-arm chandeliers are organised around a metal hub. This one is organised around a piece of stone.

    The centre is a solid column of natural stone, capped in metal at both ends, with every arm springing from its base. In the travertine version that column is cut, cored for the wiring and honed to a matte surface; in the green marble version the same operation is done on Indian green marble, a stone with a deep forest base and veining that runs from chalk white to pale jade.


    One substitution changes everything downstream. The stone carries the visual weight, so the arms can stay thin tube instead of thick castings, and the shades can stay slim. The fixture stops reading as a frame with lights bolted onto it. It reads as one object, with a mineral core and a glowing perimeter.


    The collars that hold each glass cylinder are cut from the same stone as the column and matched to it as a set, so the material story carries all the way to the outer edge instead of stopping at the centre. Banding and pore structure shift from piece to piece — that is quarried stone, not a defect — and on repeat orders we select from a single block where stock allows.


    Fluted Glass, and the Glare Question

    Every shade is a pressed fluted glass cylinder, reeded from base to rim. A clear lamp inside is refracted into vertical bands, so an eight-light fixture reads as eight columns of soft light rather than eight bright filaments.


    This is the part buyers underestimate. A multi-arm chandelier hanging 700 mm above a dining table puts its lamps more or less at seated eye level, and glare is the single most common complaint about the category. Fluted glass removes it without dimming the room: the reeds spread each filament into a vertical pattern, and the light still travels. A frosted lamp softens the effect further; a clear filament lamp gives sharper, more graphic streaks. Both are valid — it is a design choice, not a compatibility issue.

    Six, Eight or Ten Lights: Match the Diameter to the Table


    The three sizes are not a ladder to climb. They are three answers to three different rooms, and the rule is the table, not the ceiling.

    Six lights at Ø680 mm sits over a 1.6–2.0 m table — four to six seats — or a kitchen island run. It is also the size that works in a bedroom with a high ceiling, where a larger frame would crowd the room.

    Eight lights at Ø850 mm is the middle and the most specified: 2.0–2.6 m tables, eight seats, and open-plan living-dining where the fixture has to define a zone that has no walls. It is the size most often photographed in this series, and the one we suggest when the table has not been chosen yet.

    Ten lights at Ø1000 mm is for 2.6–3.2 m tables, double-height voids over a staircase or living room, and hotel lobbies. At this size the fixture is seen from below at an angle and from a landing at eye level, which is why the underside of the column is finished as carefully as the sides.


    The working rule for a rectangular table is that the fixture should span roughly half to two thirds of its length. All three sizes of the travertine fluted glass chandelier share the same 835 mm drop, so a project can run all three in one building and keep one spare-parts list, one installation method and one visual language.


    Two Stones, Three Finishes


    Yellow travertine is the warm reading: a cream-to-honey stone with horizontal banding and open pores, paired with antique brass arms. It settles into plaster, oak, linen and the general run of warm-neutral interiors.


    Indian green marble is the colder reading: a deep forest base veined from chalk white to pale jade, paired with matte black or satin nickel. This is the version for rooms with dark timber, green joinery or a moodier palette, where brass would fight the scheme rather than settle into it. Same diameter, same drop, same arm geometry — a project can run the warm version in one room and the green in the next without the two looking like different collections.


    Finish is where most projects diverge. Both stones are available across the range, and the green marble bodies can be ordered in matte black or satin nickel. Custom RAL is quoted under OEM terms, and because the frames are painted rather than plated on the black version, a touch-up on site is a paint job rather than a re-plate.


    Matching Wall Sconce

    A single-light wall sconce in the same stone and the same fluted cylinder is listed separately under wall sconces, so that a corridor or a pair of bedside walls can carry the same material language without crowding this page. The finish and stone options are the same.


    Ceiling Height, Drop and Installation


    Total drop is 835 mm across all three chandeliers. On a 2.5 m ceiling that leaves about 1.66 m of clearance; on 2.6 m, about 1.76 m. Below 2.4 m we would steer you to a semi-flush fixture instead. On higher ceilings the stem is cut to length in production, so a void or a stairwell does not need a separate design.


    Every travertine fluted glass chandelier arrives disassembled, one piece per carton: arms, glass cylinders, stone collars, canopy and fixings separately sleeved. You thread the arms into the centre hub, seat the collars and fit the shades. Nothing is welded or glued, so parts stay replaceable — useful on a hotel floor, where one broken shade should not mean one new chandelier.


    Wiring is 220–240 V, lamp holders to CE and VDE requirements, with UL and SAA available on request. Wiring and installation instructions are supplied with every carton.


    Specifications


    STD16114-6 chandelier — Ø680 × H835 mm, 6 × E14 40 W, iron + yellow travertine + glass, antique brass.


    STD16114-8 chandelier — Ø850 × H835 mm, 8 × E14 40 W, iron + yellow travertine + glass, antique brass.


    STD16114-10 chandelier — Ø1000 × H835 mm, 10 × E14 40 W, iron + yellow travertine + glass, antique brass.


    16116 series — the same three diameters and the same 835 mm drop in Indian green marble, matte black or satin nickel.


    Packing — Ø680 52 × 22 × 24 cm; Ø850 43 × 34 × 24 cm; Ø1000 50 × 37 × 24 cm. One fixture per carton.


    For Projects and Trade


    Strong Lighting has manufactured in Guzhen, Zhongshan since 2015, with two production lines, an 800 m² showroom and three in-house designers — capacity for container orders, and still small enough to answer a custom request in days rather than quarters.


    Standard production on the travertine fluted glass chandelier runs from 50 pcs per model. Lead time is about 45 days after deposit for standard finishes, longer for custom plating or batch stone selection. Payment is 30% deposit with the balance before shipment, FOB Shenzhen or Nansha. OEM and ODM are both available under your own label, and because the whole series shares one arm geometry and one drop, a mixed container of sixes, eights and tens needs no extra tooling.


    Frequently Asked Questions


    Q1: Is the stone real, or a composite?

    Solid natural stone, cut, cored and honed — not cast, filled or printed. The column and the shade collars are matched as a set for each fixture, so the veining on the collars belongs to the same stone family as the centre. Banding and pore density vary between units, which is a property of quarried material; for hotel orders we select from one block where stock allows.


    Q2: Which size should I choose for my table?

    Match the diameter to the table, not the room. Ø680 mm for 1.6–2.0 m tables and kitchen islands, Ø850 mm for 2.0–2.6 m and open-plan zones, Ø1000 mm for 2.6–3.2 m tables, stairwell voids and lobbies. If the table is not chosen yet, Ø850 mm is the safest single answer — it covers eight seats and reads correctly in most rooms.


    Q3: Can I mix the two stones in one project?

    Yes, and it is a common request. Both stones run on the same diameter, the same drop and the same arm geometry, so a building can carry travertine in the public rooms and green marble in a bar or a suite without the two looking like different collections. Order both at the same time so the collars can be cut from the same blocks.


    Q4: Will the fluted glass still glare at eye level?

    Less than a bare-bulb fixture, and the reeding is the reason. Each lamp is refracted into vertical bands rather than escaping as a bright point. A frosted E14 lamp softens it further; a clear filament lamp gives sharper, more graphic streaks. If the fixture hangs lower than 700 mm above the table, choose frosted.


    Q5: What ceiling height does the chandelier need?

    835 mm total drop. It works from a 2.5 m ceiling upwards: on 2.5 m you keep about 1.66 m of clearance, on 2.6 m about 1.76 m, and over a dining table the shades sit around 700 mm above the surface. Below 2.4 m we would recommend a semi-flush fixture instead. Longer stems are cut to length in production at no design cost.


    Q6: How much assembly is there, and can parts be replaced?

    It ships disassembled, one piece per carton, with arms, cylinders, collars and canopy separately sleeved. Assembly is threading the arms into the hub, seating the collars and fitting the shades with the supplied fixings. Nothing is welded or glued, so a single damaged shade or collar can be replaced without replacing the fixture.


    Q7: Can it be supplied with E27 holders or a different finish?

    Yes to both, with a caveat. E27 is possible but changes the cylinder diameter and therefore the shade proportion, so we quote it as a modified design with a drawing to approve first. Finishes: antique brass on travertine; matte black or satin nickel on green marble; custom RAL under OEM terms. Custom diameters and arm counts are quoted the same way.


    Q8: How should the stone and metal be cleaned?

    Dust the stone with a dry microfibre cloth. For marks, use a pH-neutral stone cleaner on a damp cloth and dry immediately. Avoid acidic or abrasive products, bleach and steel wool, which dull a honed surface. Wipe the metal with a dry cloth only; do not use metal polish on the antique brass, which is a deliberate patina rather than a lacquer.

    Lamp Type Chandelier
    Code STD16114-8
    Area Indoor
    Bulb base E14 x 8 x Max 40W
    Dimension(MM) Ø850 H835
    Primary material

    Iron+marble+Glass

    Finish of metal Brass
    Color of shade Clear
    IP degree IP20
    Item box length(CM) 43
    Item box width(CM) 34
    Item box height(CM) 24


    Related Category
    Send Inquiry
    Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
    Reject Accept